Wall Clocks

Wall Clocks

Showing 1-7 of 7 Unsold | View Sold (12) | View All (20)
Reproduction E. Howard 24 inch Dial No. 70 Regulator by Belmont Clock Co.

Reproduction E. Howard 24" Dial No. 70 Regulator by Belmont Clock Co.


ID: 2356 | Inquire...

Item ID: 2356 - Belmont Clock Co. 24" Dial Model No. 70 Wall Clock. A superb reproduction of the largest size E. Howard Model No. 70 Wall Clock. The original Model 70 was available in 5 sizes with 12", 14", 16", 20" and 24" dials. Belmont Clock Co. made 2 of these massive 24" dial clocks in 2018. The finely finished oak case is 58" tall, 31" wide and 8" deep. The lower door is reverse painted with the proper E. Howard gold leaf, and red and black paint. The 24" dial is wood and hand painted. The counterweighted hands are copies of the original trefoil design. The E. Howard & Co. signed movement has Geneva winding stopwork. The 4 1/2" Howard pendulum bob is decorated with concentric circles and delicate damascening. A magnificent repoduction of an exceedingly rare clock and in the best condition in every way.


Lenzkirch Precision Regulator Clock

Lenzkirch Precision Regulator Clock


ID: 2473 | Inquire...

Lenzkirch Precision Regulator Clock - Mahogany case with original finish is 58" tall, 16" wide and 8" deep. The silvered dial is 10" in diameter. Original blued steel hands. The 8 day, precision regulator movement is signed Lenzkirch and numbered 1 Million and 963328 dating the clock to 1921. The movement has thick plates with adjustable jeweled pallets and jeweled pivots on the pallet and escape wheel arbors. Large knurled thumb screws hold the plates and secure the movement to the very substantial brass mount in the case. The wood pendulum rod has a 12 pound bob with a very large knurled rating nut and blued indicator pointer. The crutch slot in the pendulum is adjustable for a perfect fit on the crutch pin. The pendulum rod has a repair just above the bob. The movement is driven by a tiny 2 pound weight! A superb timekeeper.


English Fusee Railway Station Clock

English Fusee Railway Station Clock


ID: 2114 | Inquire...

English Fusee Railroad Station Clock in superbly carved case. The intricately carved walnut case is 18 1/2" in diameter. The silvered 8" dial is engraved "Dobbie M'Innes Ltd, Glasgow" and "L.N.W.R.". London North Western Railway. The fine quality single fusee movement with balance wheel escapement is marked Coventry Astral. The heavy brass bezel has very thick beveled glass. The movement has been serviced and keeps excellent time. A fine quality timepiece. There is an unobtrusive split in the case at about 5:30.


E. Howard Astronomical Regulator Clock

E. Howard Astronomical Regulator Clock


ID: 2459 | Inquire...

E. Howard & Company Astronomical Regulator. Ca. 1916. E. Howard & Co made Astronomical Regulators for many of the finest astronomical observatories in the USA. The famous Howard #74 Astronomical Regulator, which is shown in Derek Roberts "Precision Pendulum Clocks" was made in the 1870's and 1880's. This clock is a later version. The oak case is 55" tall, 19" wide and 9" deep. The heavy brass dial is silvered, engraved and filled. The weight driven movement has a deadbeat escapement with maintaining power and a 2 vial mercury filled temperature compensating pendulum. The inside of the great wheel of the movement is signed "Fitted up by C. A. Hinckley, Roxbury, Mass, Apr. 24, 1916". The movement is also fitted with the original break circuit mechanism. The movement is wound through the side of the case eliminating the need to open the door and possibly disturb the air and pendulum inside. As expected, the clock is a very fine timekeeper. By oral history and a return address on an envelope of break circuit parts that came with the clock, the clock was owned by the UCLA Department of Astronomy. There is also an old card that states " Set to sidereal time for longitude 7h 56m 29s West" which goes through the Los Angeles, CA. area. The previous owner bought the clock from the stepson of Dr. George O. Abell who was an astronomy professor at UCLA for 17 years and was best known for his observations of clusters and superclusters of galaxies. His ''Abell Catalogue of Clusters of Galaxies'' is a standard reference. The stepson got the clock from his mother, Abell's widow. The clock is in fine original condition.


Welch, Spring & Co. No. 4 Regulator

Welch, Spring & Co. No. 4 Regulator - Superb!


ID: 2421 | Inquire...

Itrem ID: 2421 - Welch, Spring & Co. No. 4 Regulator - 30 Day. This is the finest example that I have seen. The clock is mint original in every way. The walnut case is flawless. The finials are all original and flawless. While I have not seen another Welch regulator with Arabic numerals, this clock shows no signs that the dial has been changed in any way. The 30 day movement iwith nickel plated plates is in fine condition. An amazing clock.


Foster Campos Presentation Banjo Clock

Foster Campos Presentation Banjo Clock


ID: 2157 | Inquire...

Foster Campos Crossbanded Presentation Banjo Clock. #14-85


E. Howard No. 89 Master Clock and Slaves

E. Howard No. 89 Master Clock and Slaves


ID: 1330 | Inquire...

This is a ca. 1913 E. Howard and Company No. 89 Regulator Master Clock and 2 Bronze finished secondary clocks. Both the master and the secondary clocks are in mint original condition. The solid mahogany master clock is 59" tall, 23" wide and 10 1/2" deep. The 12 " painted dial is in fine condition with the usual touchup around the mounting screws. The movement is spring driven and electrically rewound. The cherry pendulum rod is gilt. The 8" decorated brass bob is gorgeous. The beat plate is original to the clock. All wiring and controls are original and operating correctly. The clock keeps extremely accurate time. It is currently driving the 2 secondary clocks. The 2 secondary clocks are 13" in diameter with 10" dials. One of the slaves has minor paint loss are the screw mounting holes. The wood cases are encased in bronze finished metal and are in fine original condition. The following is a quote from the Howard literature "Our No. 89 Regulator represents without question, the best regulator value on the market. It is used extensively by jewelers, watchmakers, and in train dispatchers' offices of the leading railroads. The wheels are carefully and accurately cut from hard rolled clock brass; pinions and arbors are cut from solid bar steel, tempered and highly polished. The movement plates are specially heavy, affording good bearings for all pivots. The escapement is the Graham deadbeat……This regulator is furnished with 8 day or self-winding movement. It can be used for operation any number of secondary clocks. As an example of the excellence of the general performance we call attention to ten of these regulators furnished to…..for the month of August 1889. The average variation from mean time during the month was 8.9 seconds. The greatest individual variation of any of these regulators was 24 seconds". Please view the photos for additional information and


Hicks Antique Clocks

BACK TO TOP